This ICON Stage 2 suspension system for the 2010-UP Toyota 4Runner uses the same components as the Stage 1 system with a few simple changes and additions. The 2.5 Series coilover shocks used in this system are the Extended Travel version, offering increased wheel travel that will enhance your on and off-road performance even more so than the standard travel units. Since these shocks do provide more suspension travel, they require the use of an ICON upper control arm. The tubular steel uniball upper control arm kit found in this system offers improved articulation and strength over the OE control arms, and has alignment correction built-in.
TECH INFO:
- We recommend the use of our #56100 shock shin guards or a protective boot to reduce the chance of shock shaft damage. These shocks are located in a vulnerable position that allows debris to easily come in direct contact with the shock shaft.
- KDSS Equipped vehicles require 54200 Rear Adjustable Track Bar
WHEEL & TIRE FITMENT INFO:
OEM Wheels & Tires: Yes
Aftermarket Wheels: 8-8.5" Wide, 4.75" Backspace
Aftermarket Tires: 33" x 11.25
(Larger tires may fit but fender trimming and modifications will be required)
SYSTEM COMPONENTS:
58647 (QTY.1) | 10-UP 4RUNNER EXT TRAVEL 2.5 SERIES IR COILOVER KIT
58451 (QTY.1) | 03-UP 4RUNNER TUBULAR UCA KIT
52700 (QTY.1) | 07-UP FJ/03-UP 4RUNNER REAR 2" SPRING KIT
56505 (QTY.2) | 03-UP 4 RUNNER 1-3" REAR 2.0 ALUMINUM SERIES IR SHOCK
OPTIONS:
56100 | ICON Rear shock shin guards54000 | Billet lower adjustable link arms
54100 | Billet upper adjustable link arms
54200 | Adjustable track bar
52800 | ICON Overland Series dual rate 3" lift rear coil springs
56104 | Rear hydraulic bumpstop kit
191011 | ICON tubular uniball upper control arm cover caps
198000 | ICON 2 pin spanner wrench
![[name]](assets/templates/common-core/images/spacer.gif)
[ITEMPRICE]