The 2014 RAM 2500 4WD is a heavy-duty beast of a truck that is suited for use as a job site workhorse, a family toy hauler for those weekend getaways, or an off-road rig capable of taking some serious abuse in the dirt. The new RAM s suspension has been completely redesigned with a radius arm front end and a multi-link, coil sprung rear. ICON engineers primary focus for this system was to maximize wheel travel while developing a ride tune across the line of ICON shock absorbers that strikes the perfect balance between on-road comfort and off-road performance.
ICON's 2014 RAM 2500 4WD 2.5 Stage 4 Suspension System is made up of dual rate front coil springs, necessary bracketry and hardware, front adjustable track bar, as well as 2.5 Series reservoir front and rear shocks with CDCV. This system improves ride quality and performance both on and off road. The ICON stage 4 system is great for towing, rough construction site terrains, and country dirt roads all while keeping a smooth highway feel. ICON 2.5" reservoir shocks with CDCV ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. The ICON CDC Valve upgrade is included in this stage for those desiring an easy way to tune the ride externally. An adjustable track bar with FK bearings is used to not only improve rigidity over the flexible factory joints, but offer adjustability to center the front axle under the truck. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured you have the best suspension solution on the market.
This system includes multi-rate rear coil springs for a more compliant ride. The lighter initial rate of these performance rear coil springs helps the truck feel smoother and more controlled over washboard roads, small whoops, or similar terrain. The secondary rate allows the truck to maintain exceptional ride quality over larger obstacles, while at the same time retaining factory payload capacity. These performance systems were developed with the chase truck type of application in mind, and will significantly increase the on and off-road performance of the RAM 2500 when driven aggressively.
- ICON engineered dual rate coil springs with match tuned 2.5" V.S. Series shocks with CDCV
- Adjustable track bar with PTFE lined FK bearings
- Increased wheel travel and ride quality over stock with no change in towing capacity
- Less body roll than stock
- No drive shaft modifications needed
- Made in the USA
- 4wd applications only
- Lifted height specs based on diesel engine. Gas engine will bring slightly taller lift heights
WHEEL & TIRE FITMENT INFO:
OEM Wheels & Tires: Yes
Aftermarket Wheels: 8.5-9" Wide Wheel With 5.75" Backspace
Aftermarket Tires: 35" x 12.50
(Larger Tires May Fit but Fender Trimming and Modifications will be Required)
SYSTEM COMPONENTS:214200 (QTY.1) | 14-UP RAM 2500 2.5" FRONT DUAL RATE SPRING KIT
214203 (QTY.1) | 14-UP RAM 2500 FRONT ADJUSTABLE TRACK BAR KIT
214204 (QTY.1) | 14-UP RAM 2500 REAR ADJUSTABLE TRACK BAR KIT
214206 (QTY.1) | 14-UP RAM 2500 .5" REAR PERFORMANCE SPRING KIT
217802CP (QTY.1) | 14-UP RAM 2500 2.5" FRONT 2.5 VS RR CDCV PAIR
217705CP (QTY.1) | 14-UP RAM 2500 .5" PERFORMANCE REAR 2.5 VS PB CDCV PAIR