Our Gen-3 Stage 2 kit allows you to add front/rear audio on Maverick X3 models, ideal if you are looking to add sound to your ride but not ready to add amplifiers or a subwoofer yet. Kit is equipped with a PMX-1 digital media receiver, upper dash kit, front speaker panels, Element Ready™ M0 6.5” speakers, and rear M0 6.5” moto-cans with wiring harness. Kit supplied with all necessary mounting and installation hardware requiring minimal time and tools.
Great sound for the great outdoors
Can-Am's Maverick X3 is a high-performance side-by-side with plenty of power, and Rockford Fosgate's Stage 2 Maverick X3 kit will definitely add more power to your audio system. With a marine digital media receiver and four powerful marine speakers, this system will add some serious thump to your off-road adventures.
No cuts, no muss, no mods
Rockford Fosgate designed this package to fit right into your Maverick, with no cutting and no modification needed (minimal drilling required). It also comes with all the parts and pieces needed for a smooth, hassle-free installation. Each component is tough enough for trail duty, so you won't have to worry about your audio gear getting swamped.
A rugged and rockin' receiver
Rockford Fosgate's PMX-1 digital media receiver packs a lot of features into a compact, water-resistant package. This trail-ready stereo features built-in Bluetooth®, so you can stream music stored on your phone, or tune into Pandora® and enjoy your favorite playlists. If you prefer to plug in, you'll find an aux input, plus a USB input that will charge your phone while you're playing music. Speaking of charges, the PMX-1 also has a low-voltage warning alert built-in, so you won't accidentally drain your battery. This kit includes a custom-designed kit that holds the receiver and blends into your Maverick's dash.
Four speakers for awesome sound
The package includes two pairs of 6-1/2" marine speakers, two for the front and two loaded into cage-mountable enclosures. The durable poly cones withstand moisture and sunlight, as do the 1/2" dome tweeters in the grilles. They're really easy to install, too, thanks to the made-for-the-Maverick X3 speaker enclosures included in this kit. These rugged enclosures bolt right in using the factory mounting holes with just a little bit of drilling.
Product highlights:
- system includes marine digital media receiver, four speakers, dash kit, speaker enclosures, and wiring
- comes with all necessary mounting and installation hardware
Rockford Fosgate PMX-1 marine digital media receiver (does not play CDs)
- built-in amplifier (25 watts RMS/50 peak x 4 channels)
- built-in Bluetooth for music streaming (will not make calls)
- works with Apple and Android smartphones
- USB port and aux input
- rugged Element Ready design
- 2.3" dot matrix display
- global AM/FM/Weather tuner (antenna not included)
- warranty: 2 years
Rockford Fosgate M0-65B 6-1/2" 2-way marine speakers (two pairs)
- power handling up to 65 watts RMS (250 watts peak)
- two front speakers mounted in custom enclosures
- two rear speakers mounted in cage-mountable enclosures
- UV-stable Centrex® injection-molded plastic parts
- 1/2" dome tweeters
- warranty: 2 years
- Our 60-day money-back guarantee
- MFR # X317-STG2
What's in the box:
- This Rockford Fosgate package contains 6 individually boxed items:
- PMX-1 Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- 4 Machine screws
- 4 Hex-nuts
- Operation Manual
- M0-65B 6.5" Marine Speakers:
- Two 2-way marine speakers
- Twelve 1-1/4" Stainless steel Allen head screws
- Two 3mm Allen head bits
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- Rockford Fosgate contact information
- M0WL-65MB 6.5" Moto-Can Speakers:
- Two M0 6.5" Moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0" - 1.6" rubber shims w/mounting hardware (four 1-3/8" bolts / 4 flat washers / 4 lock washers)
- Four 1.6" - 2.0" rubber shims w/mounting hardware (four 1-3/4" bolts / 4 flat washers / 4 lock washers)
- Two 12" 6-pin wire harnesses w/Deutsch connectors and integrated rubber seals
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8" Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- X317-DK Dash Kit:
- Radio housing
- Trim ring
- Rear support plate
- 35" Speaker harness
- 6' Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- Two 24mm screws
- Eight 1/2" screws
- Twelve 8" wire-ties
- Contact information card
- X317-FSE Speaker Enclosures:
- 2 Unloaded speaker enclosures
- 35" Left front speaker harness
- 52" Right front speaker harness
- Five 8" wire ties
- One 30mm bolt
- 1 Flat washer
- 1 Nut
- 2 Warning decals
- Contact information
- MX-RSW16 Rear Speaker Harnesses:
- Two 17.5' Rear speaker harnesses
- Six 6" wire-ties w/ push-fastener ends
- Sixteen 7.5" wire-ties
VEHICLE FITMENT
| YEARS | MAKE | MODEL |
|---|
| 2017-2021 | Can-Am | Maverick X3 900 MAX Turbo |
| 2017-2021 | Can-Am | Maverick X3 900 MAX Turbo R |
| 2017-2021 | Can-Am | Maverick X3 900 MAX X ds Turbo R |
| 2017-2021 | Can-Am | Maverick X3 900 MAX X rs Turbo R |
| 2017-2020 | Can-Am | Maverick X3 900 Turbo |
| 2017-2020 | Can-Am | Maverick X3 900 Turbo R |
| 2017-2021 | Can-Am | Maverick X3 900 X ds Turbo R |
| 2017-2021 | Can-Am | Maverick X3 900 X rs Turbo R |
| 2020-2021 | Can-Am | Maverick X3 900 X rc Turbo RR |
| 2021 | Can-Am | Maverick X3 900 MAX X ds Turbo |
| 2021 | Can-Am | Maverick X3 900 MAX X ds Turbo RR |
| 2021 | Can-Am | Maverick X3 900 MAX X mr Turbo RR |
| 2021 | Can-Am | Maverick X3 900 MAX X rs Turbo RR |
| 2021 | Can-Am | Maverick X3 900 X ds Turbo RR |
| 2021 | Can-Am | Maverick X3 900 X mr Turbo RR |
| 2021 | Can-Am | Maverick X3 900 X rc Turbo |
| 2021 | Can-Am | Maverick X3 900 X rs Turbo RR |
[ITEMPRICE]