SSV Works is the first company to integrate audio in side-by-sides, we have pioneered all the great features you find in audio-systems today. From plug-&-play kit solutions, true weatherproof ratings, to factory fit and finishes, SSV has set the standard in UTV audio from the very beginning!

Ride Command: Have a RZR with factory audio? This kit allows you to easily add more to your system. Simply mount the enclosure, plug it in to your existing Ride Command system and hit the trail!

Plug-&-Play: No Soldering, cutting or crimping! Designed to install as easy as possible. Simply bolt down the speaker enclosures with the pre-installed speakers, run the vehicle specific plug-&-play wiring, turn the key and go! Made to install as easy as possible, you spend less time wrenching and more time riding!

Factory Fit and Finish: Each kit looks just the way it should, like it came straight from the factory. Purpose built, our enclosures match the factory styling and fits with seamless precision.

Trail Ready: Built for the off-road environment, SSV Works’ audio components will withstand all the harsh riding conditions. From sand, dust, water or snow, you can ride your favorite trails without sacrificing premium audio from SSV Works.

Included:

• 6.5” Rear Cage-Mount Speaker-Pods w/SSV Works Speakers
• Kicker 300w 4-Channel Amplifier w/Mounting Plate
• Plug-&-Play Wiring Kit for Ride Command Systems

*US Pat Utility #10,057,669, Design #D796479

• Rear Cage Mount speaker pods with SSV Works 6.5" speakers
• Plug-&-Play harness, wiring and cables to work with the factory Polaris Ride Command system.

Speakers:
SSV Works Powersports speakers: (RZ4-F65A) Get louder, cleaner sound even in the dirt and mud. Engineered specifically for Powersports, the new WP-A6 Weather Proof speaker brings audiophile grade components to the outdoors. The 25mm tweeter creates crisp brilliant highs engineered to be heard outdoors, even in a helmet over the motor haulin' down the trails. The grille mounted tweeter allows for peak cone travel creating maximum output while providing a low profile with optimal weatherproofing.
Marine speakers are great for boats; however boat speakers don't get as wet, dirty or muddy as you do in a Side X Side. WP-A6 speakers feature an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps. Reliability meets control with the Santoprene surround; a 30% lighter thermoplastic elastomer surrounding the polypropylene cone for exceptional volume and clarity in the harshest conditions.
The SSV Works WP-A6 speaker features a unique positive lock connector to prevent speaker wire detachment inside the enclosure. No matter how hard you drive, your speakers will keep on rockin' with 4ohms and 60w RMS/120w peak power.
*Multiple Patents Pending*

SSV Works Chroma Grille Upgrades:
LIMITED TIME ONLY - GREY, RED OR WHITE CHROMA GRILLE UPGRADES!
SSV Works WP-A6 speakers add acoustically transparent mesh grilles with interchangeable color inserts to add the ultimate in customization to your Side X Side. The inserts are easily swappable allowing you to custom-match the speakers to the rest of your ride, favorite team or paint scheme. Choose from Red, White, Blue or Orange. Sold in pairs. (not compatible with Kicker speakers)

F3™ - The Original Factory Fit & Finish: Each RZR Pro R looks just the way it should, like it came straight from the factory. Purpose built, our enclosures match the factory styling and fits with seamless precision.

Trail Ready™: Built for the off-road environment, SSV Works’ audio components will withstand all the harsh riding conditions. From sand, dust, water or snow, you can ride your favorite trails without sacrificing premium audio from SSV Works.

Premium Quality: Our product is meticulously crafted with high-strength materials, epitomizing premium quality and durability.

To ensure a perfect fit, please refer to our COMPATIBILITY tab before making your purchase decision.

Doubles Bass Output: Adds a second 4-ohm sub to create a 2-ohm load, allowing the factory Rockford Fosgate amp to increase from 300W to 600W.

Factory Amp Friendly: Keeps and utilizes the factory Rockford Fosgate audio system for a clean, integrated bass upgrade.

20-Minute Install: No cutting, no fabrication, and no custom wiring, just drop it in and plug it in.

SSV 10in Subwoofer Performance: Built for deep, hard-hitting bass and designed to handle real UTV vibration and abuse.

// amplified low-end advantage

double the bass, using factory power.

The 2026 RZR Pro R factory Rockford Fosgate system runs a single factory subwoofer with 400 watts at 4 ohms from a dedicated sub channel. This SSV Works rear-seat subwoofer enclosure plugs into the factory rear subwoofer output that is already run to the back, adding a second subwoofer on the amp’s second sub channel, also delivering 400 watts at 4 ohms. The result is double the powered sub output versus the single factory sub setup, with no amp replacement and no wiring required.

20 minute Install!!

Plug-&-Play(For SSV Kits): No Soldering, cutting or crimping! Designed to install as easy as possible. Simply bolt down the speaker enclosure with the pre-installed subwoofer, run the vehicle specific plug-&-play wiring, turn the key and go! Made to install as easy as possible, you spend less time wrenching and more time riding! If you're customizing your stereo system, soldering, cutting and crimping will be required.

F3™ - The Original Factory Fit & Finish: Each Maverick R Kit looks just the way it should, like it came straight from the factory. Purpose built, our enclosures match the factory styling and fits with seamless precision.

Trail Ready: Built for the off-road environment, SSV Works’ audio components will withstand all the harsh riding conditions. From sand, dust, water or snow, you can ride your favorite trails without sacrificing premium audio from SSV Works.

2020-2026 Polaris RZR Pro R, Pro S, Turbo R and Pro XP 4 Rear-Seat 10in Subwoofer-Enclosure

We are proud to introduce our new subwoofer enclosure, as it’s a great way to expand to a dual-sub option in a Polaris RZR Pro R, Pro S, Turbo R or pro XP 4-seater.

Configure Options:

'26 Pro R 4 Ultimate Factory Audio: Plug-&-Play Add-On
RZR Pro Series V-Spec/K-Spec Kit: Add-On for SSV Plug-&-Play Kits
SSV Works V Series 2-ohm: 10" - 1000 watt (500w RMS)
SSV Works V Series 4-ohm: 10" - 1000 watt (500w RMS)
Unloaded: Enclosure Only

Included:

• Subwoofer Enclosure
• All Mounting Hardware
• Pre-Mounted/Wired Subwoofer (if purchasing with sub)
• Plug-&-Play wiring (if purchasing as V-Spec/K-Spec Add-on)

*Patent Number: D1092430

Plug-&-Play: No Soldering, cutting or crimping! Designed to install as easy as possible. Simply bolt down the speaker enclosures with the pre-installed speakers, run the vehicle specific plug-&-play wiring, turn the key and go! Made to install as easy as possible, you spend less time wrenching and more time riding!

F3™ - The Original Factory Fit & Finish: Each RZR Pro R looks just the way it should, like it came straight from the factory. Purpose built, our enclosures match the factory styling and fits with seamless precision.

Trail Ready™: Built for the off-road environment, SSV Works’ audio components will withstand all the harsh riding conditions. From sand, dust, water or snow, you can ride your favorite trails without sacrificing premium audio from SSV Works.

Premium Quality: Our product is meticulously crafted with high-strength materials, epitomizing premium quality and durability.

To ensure a perfect fit, please refer to our COMPATIBILITY tab before making your purchase decision.

Please allow 1-2 weeks processing time for the kit to ship

Technical Specifications

The First Full Audio Kit for 2025+ Polaris Pro Series RZR

Introducing the first complete plug-&-play audio upgrade designed specifically for the 2025-UP Polaris RZR Pro R, Pro S, and Pro XP. This all-in-one system replaces the weak, paper-cone factory speakers with a high-performance setup built to dominate the trails and bring the party.

Seamlessly integrating with your Ride Command system, this kit delivers an earth-shaking 1400 watts of clean power, that’s 1,000 more watts than stock, while staying perfectly matched to the factory alternator to prevent overtaxing your electrical system.

System Highlights:

• 10" Ported Subwoofer Enclosure – Delivers deep, hard-hitting bass
• Kicker Compression Horn Speakers (Front & Rear) – Built to project loud, clear audio across any terrain.
• Direct Plug-&-Play Installation – No cutting. No splicing. No headaches.
• Ride Command Integration – Full control with factory-style interface.
• Optional Add-On Rear 10" Sub – Available for 4-seater models to take the bass even further.

Limited-Time Bonus: Get a set of factory replacement tweeters FREE.

Whether you're riding dunes or hosting the next trail party, this is the ultimate upgrade for RZR Pro Series owners who demand more from their sound.

Each kit includes the necessary mounting hardware required for a smooth installation.

*Patent Pending

Plug-&-Play: No Soldering, cutting or crimping! Designed to install as easy as possible. Simply bolt down the speaker enclosures with the pre-installed speakers, run the vehicle specific plug-&-play wiring, turn the key and go! Made to install as easy as possible, you spend less time wrenching and more time riding!

F3™ - The Original Factory Fit & Finish: Each RZR Pro R looks just the way it should, like it came straight from the factory. Purpose built, our enclosures match the factory styling and fits with seamless precision.

Trail Ready™: Built for the off-road environment, SSV Works’ audio components will withstand all the harsh riding conditions. From sand, dust, water or snow, you can ride your favorite trails without sacrificing premium audio from SSV Works.

Premium Quality: Our product is meticulously crafted with high-strength materials, epitomizing premium quality and durability.

To ensure a perfect fit, please refer to our COMPATIBILITY tab before making your purchase decision.

Please allow 1-2 weeks processing time for the kit to ship

Technical Specifications

Plug-&-Play Install: Uses factory audio wiring for a clean installation, with only the RGB wiring needing to be run.

6-Speaker System: Includes two tweeters and four 6.5-inch full-range speakers.

Double the Bass Output: Add the rear subwoofer to use the amp’s second 400-watt sub channel, effectively doubling subwoofer power. (compatible with the Pro R 4 Only)

Smart System Design: Retains the factory front subwoofer because replacing it on factory power adds cost, not performance.

UNLOCK THE POWER POLARIS LEFT ON THE TABLE.

Built exclusively for the 2026 Polaris RZR Pro R 4 Ultimate, UNPHASED-5 is designed around the factory 10-inch Ride Command system and 1500-watt, 8-channel amplifier. The big wattage number sounds impressive, but the factory setup only uses about half of that available power. With an unused second subwoofer channel, no front door speakers and cheap speakers from the factory, a large portion of the amp goes untouched. UNPHASED-5 changes that by upgrading the speakers and putting the factory amp to work the way it should have been from day one. The result is more output, fuller sound, and stronger bass, without the added cost of an aftermarket amplifier

DOUBLE THE BASS, NO WASTING MONEY.

This kit keeps the factory front subwoofer in place because it already uses the amp’s 400-watt at 4-ohm sub channel. Swapping in an aftermarket front sub would still only receive the same 400 watts, adding cost without adding performance. For customers who want more low-end, the rear seat 10-inch subwoofer enclosure can be added to the order as a simple plug-&-play upgrade. It installs in about 20 minutes and uses the amp’s unused second subwoofer channel to double the bass output of the vehicle.

Plug-&-Play Install: Uses factory audio wiring for a clean installation, with only the RGB wiring needing to be run.

8-Speaker System: Includes two tweeters and six 6.5-inch full-range speakers.

Double the Bass Output: Add the rear subwoofer to use the amp’s second 400-watt sub channel, effectively doubling subwoofer power. (compatible with the Pro R 4 Only)

Smart System Design: Retains the factory front subwoofer because replacing it on factory power adds cost, not performance.

UNLOCK THE POWER POLARIS LEFT ON THE TABLE.

Built exclusively for the 2026 Polaris RZR Pro R 4 Ultimate, UNPHASED-6 is designed around the factory 10-inch Ride Command system and 1500-watt, 8-channel amplifier. The big wattage number sounds impressive, but the factory setup only uses about half of that available power. With an unused second subwoofer channel, no front door speakers and cheap speakers from the factory, a large portion of the amp goes untouched. UNPHASED-6 changes that by upgrading the speakers and putting the factory amp to work the way it should have been from day one. The result is more output, fuller sound, and stronger bass, without the added cost of an aftermarket amplifier.

DOUBLE THE BASS, NO WASTING MONEY.

This kit keeps the factory front subwoofer in place because it already uses the amp’s 400-watt at 4-ohm sub channel. Swapping in an aftermarket front sub would still only receive the same 400 watts, adding cost without adding performance. For customers who want more low-end, the rear seat 10-inch subwoofer enclosure can be added to the order as a simple plug-&-play upgrade. It installs in about 20 minutes and uses the amp’s unused second subwoofer channel to double the bass output of the vehicle.

Plug-&-Play Install: Uses factory audio wiring for a clean installation, with only the RGB wiring needing to be run.

11-Speaker System: Includes two tweeters, eight 6.5-inch full-range speakers, and one rear-seat 10-inch subwoofer.

Double the Bass Output: Adds a rear subwoofer to use the amp’s second 400-watt sub channel, effectively doubling subwoofer power.

Smart System Design: Retains the factory front subwoofer because replacing it on factory power adds cost, not performance.

UNLOCK THE POWER POLARIS LEFT ON THE TABLE.

Built exclusively for the 2026 Polaris RZR Pro R 4 Ultimate, UNPHASED-7 is designed around the factory 10-inch Ride Command system and 1500-watt, 8-channel amplifier. The big wattage number sounds impressive, but the factory setup only uses about half of that available power. With an unused second subwoofer channel, no front door speakers and cheap speakers from the factory, a large portion of the amp goes untouched. UNPHASED-7 changes that by upgrading the speakers and putting the factory amp to work the way it should have been from day one. The result is more output, fuller sound, and stronger bass, without the added cost of an aftermarket amplifier

DOUBLE THE BASS, NO WASTING MONEY.

The included rear seat 10-inch subwoofer enclosure plugs into the factory system and uses the amp’s unused second subwoofer channel. Since each sub channel delivers 400 watts at 4 ohms, adding this enclosure brings an additional 400 watts into play, effectively doubling the vehicle’s subwoofer power compared to the factory setup. The front factory subwoofer stays in place for a reason. Replacing it with a higher-power aftermarket sub would still leave it receiving the same 400 watts, delivering little to no real benefit while increasing cost. This kit is built to improve performance where it matters, not sell parts you do not need.

Plug-&-Play Install: Uses factory audio wiring for a clean installation, with only the RGB wiring needing to be run.

6-Speaker System: Includes two tweeters and four 6.5-inch full-range speakers.

Double the Bass Output: Add the rear subwoofer to use the amp’s second 400-watt sub channel, effectively doubling subwoofer power. (compatible with the Pro R 4 Only)

Smart System Design: Retains the factory front subwoofer because replacing it on factory power adds cost, not performance.

SSV Works 2026 Polaris RZR Pro R 4 Ultimate Plug-&-Play 6-Speaker Factory Audio Upgrade Kit (UNPHASED-5)

The SSV Works UNPHASED-5 Audio Upgrade Kit is the definitive solution for owners looking to unlock the full potential of the 2026 Polaris RZR Pro R 4 Ultimate. While the factory 1500-watt, 8-channel amplifier boasts impressive specs, the stock configuration leaves a significant portion of that power untapped. This kit bridges the gap by replacing low-quality factory components with high-performance speakers designed to utilize every available watt. By adding front door speakers and upgrading existing drivers, this system delivers dramatically increased output and fuller sound without the unnecessary expense of an aftermarket amplifier.

Engineering meets efficiency with a design that prioritizes factory integration and ease of installation. The UNPHASED-5 system utilizes the vehicle's original wiring harnesses, ensuring a clean bolt-down process that maintains the integrity of the 10-inch Ride Command unit. The kit includes six total speakers, featuring two precision-tuned tweeters and four 6.5-inch full-range powersports speakers that offer superior clarity and midbass compared to the original equipment. This platform-specific upgrade ensures that the high-end audio performance matches the aggressive capabilities of the Pro R 4 chassis.

Durability is at the forefront of this audio transformation, as every component is built to withstand the rigors of the off-road environment. To maximize the vehicle's low-end response, the kit is designed to work alongside the factory front sub while offering a seamless path to double the bass output via an optional second 10-inch rear subwoofer. Backed by a limited lifetime warranty, the UNPHASED-5 kit provides a rugged, high-fidelity surround sound experience that is protected for the long haul.

Features

• Factory Amp Upgrade: Unlocks more of the factory 1500-watt, 8-channel amplifier by adding speakers where Polaris left channels unused
• Plug-&-Play Install: Uses factory audio wiring for a clean installation, with only the RGB wiring needing to be run
• 6-Speaker System: Includes two tweeters and four 6.5-inch full-range speakers
• Double the Bass Output: Add the rear subwoofer to use the amp’s second 400-watt sub channel, effectively doubling subwoofer power (compatible with the Pro R 4 Only)
• Smart System Design: Retains the factory front subwoofer because replacing it on factory power adds cost, not performance

Specifications

SSV Works V6 Speakers

• Speaker Size: 6.5"
• Watts MAX: 160w
• Watts RMS: 80w
• Impedance: 4ohm
• Range: Full
• Warranty: Lifetime

SSV Works V10 Subwoofer (add-on Item)

• Subwoofer Size: 10"
• Watts MAX: 1000w
• Watts RMS: 500w
• Impedance: 4ohm
• Sensitivity: 85dB
• Freq Response: 40-1.5kHz
• Warranty: Lifetime

Includes

• (2) 1" Tweeters
• (4) 6.5" Full-range Speakers
• RGB Controller
• Harnesses

Fitment

• 2026 Polaris RZR Pro R 4 Ultimate

Notes

• Doesn't fit 2026 Polaris RZR Pro R Ultimate
• SSV Works V10 Subwoofer is not included and sold separately

SSV Works (About)

Based out of its 20,000-square-foot facility in Oxnard, CA, award-winning SSV Works®, was founded in 2006 and has since become a global leader in designing the market's best off-road, weatherproof audio systems for today's hottest and most popular UTVs. SSV Works is the original purpose-built audio manufacturer, offering every piece needed for a complete, plug-&-play install. With more than 40 years in audio design and manufacturing experience by team members who are also passionate off-road enthusiasts, SSV Works is the top choice among off-road consumers and professionals worldwide. SSV Works currently offers stereo systems for Polaris, Can-Am, Kawasaki, Yamaha, Honda, Arctic Cat, and Jeep vehicles. Take your ride to the next level and install an SSV Works system today!

The SSV Works UNPHASED-6 Audio Upgrade Kit is the premier choice for riders looking to maximize the 2026 Polaris RZR Pro R 4 Ultimate entertainment system. While the vehicle arrives with a high-wattage 8-channel amplifier, the stock configuration ignores a massive portion of that available power. This kit unlocks that hidden potential by replacing low-fidelity factory components with high-output speakers specifically engineered to utilize every unused channel. By optimizing the existing power source, this system provides a dramatic increase in volume and tonal depth without the complexity or cost of installing a secondary aftermarket amplifier.

This comprehensive upgrade focuses on seamless integration and professional-grade performance. The UNPHASED-6 kit adds critical front door speakers and upgrades existing drivers to provide a true surround-sound experience on the trail. It features eleven total speakers, including six 6.5-inch full-range powersports speakers and precision tweeters that deliver crisp highs and punchy midbass. Because the system is tuned specifically for the Pro R 4 platform, it maintains full compatibility with the 10-inch Ride Command unit while significantly reducing distortion at high volumes.

Installation is engineered to be as rugged as the vehicle itself, utilizing a plug-and-play architecture that connects directly to factory wiring harnesses. The weather-proof construction ensures that the audio system thrives in mud, water, and dust. For those seeking maximum impact, the kit is designed to support the addition of a second 10-inch subwoofer, doubling the low-end output by tapping into the amplifier’s secondary sub channel. This entire package is backed by a limited lifetime warranty, ensuring that the soundtrack to the ride is as reliable as the machine.

Features

• Factory Amp Upgrade: Unlocks more of the factory 1500-watt, 8-channel amplifier by adding speakers where Polaris left channels unused
• Plug-&-Play Install: Uses factory audio wiring for a clean installation, with only the RGB wiring needing to be run
• 8-Speaker System: Includes two tweeters and six 6.5-inch full-range speakers
• Double the Bass Output: Add the rear subwoofer to use the amp’s second 400-watt sub channel, effectively doubling subwoofer power (compatible with the Pro R 4 Only)
• Smart System Design: Retains the factory front subwoofer because replacing it on factory power adds cost, not performance

Specifications

SSV Works V6 Speakers

• Speaker Size: 6.5"
• Watts MAX: 160w
• Watts RMS: 80w
• Impedance: 4ohm
• Range: Full
• Warranty: Lifetime

SSV Works V10 Subwoofer (add-on Item)

• Subwoofer Size: 10"
• Watts MAX: 1000w
• Watts RMS: 500w
• Impedance: 4ohm
• Sensitivity: 85dB
• Freq Response: 40-1.5kHz
• Warranty: Lifetime

Includes

• (2) 1" Tweeters
• (6) 6.5" Full-range Speakers
• RGB Controller
• Harnesses

Fitment

• 2026 Polaris RZR Pro R 4 Ultimate

Notes

• Doesn't fit 2026 Polaris RZR Pro R Ultimate
• SSV Works V10 Subwoofer is not included and sold separately

SSV Works (About)

Based out of its 20,000-square-foot facility in Oxnard, CA, award-winning SSV Works®, was founded in 2006 and has since become a global leader in designing the market's best off-road, weatherproof audio systems for today's hottest and most popular UTVs. SSV Works is the original purpose-built audio manufacturer, offering every piece needed for a complete, plug-&-play install. With more than 40 years in audio design and manufacturing experience by team members who are also passionate off-road enthusiasts, SSV Works is the top choice among off-road consumers and professionals worldwide. SSV Works currently offers stereo systems for Polaris, Can-Am, Kawasaki, Yamaha, Honda, Arctic Cat, and Jeep vehicles. Take your ride to the next level and install an SSV Works system today!

The SSV Works UNPHASED-7 Audio Upgrade Kit represents the ultimate acoustic transformation for the 2026 Polaris RZR Pro R 4 Ultimate. While the vehicle features a high-output 1500-watt, 8-channel amplifier from the factory, the stock configuration ignores a massive portion of that potential power. This kit is meticulously engineered to unlock every available watt by replacing inferior factory speakers and populating unused channels with high-performance components. By optimizing the existing power source, this system provides a massive increase in volume and tonal depth without the high cost of an aftermarket amplifier.

This comprehensive 11-speaker package provides a total immersive experience specifically tuned for the Pro R 4 platform. The kit includes eight 6.5-inch full-range powersports speakers, two precision-tuned tweeters, and a powerful 10-inch subwoofer enclosure for the rear seat. By utilizing the factory amp's secondary subwoofer channel, the UNPHASED-7 effectively doubles the vehicle's bass output while retaining the original front subwoofer. This strategic design ensures maximum performance gains where they matter most, delivering crystal clarity and thunderous low-end response that remains distortion-free at high trail speeds.

Installation is designed for maximum efficiency, utilizing a true plug-and-play architecture that interfaces directly with the factory 10-inch Ride Command system. The weather-proof, marine-grade components are built to survive the harshest off-road environments, from deep mud to desert silt. With a bolt-down design that requires no major rewiring, this kit offers a professional-grade finish that looks like original equipment. Backed by a limited lifetime warranty, the UNPHASED-7 is the cleanest and most powerful way to upgrade the factory audio system for the long haul.

Features

• Factory Amp Upgrade: Unlocks more of the factory 1500-watt, 8-channel amplifier by adding speakers where Polaris left channels unused
• Plug-&-Play Install: Uses factory audio wiring for a clean installation, with only the RGB wiring needing to be run
• 11-Speaker System: Includes two tweeters, eight 6.5-inch full-range speakers, and one rear-seat 10-inch subwoofer
• Double the Bass Output: Rear subwoofer use the amp’s second 400-watt sub channel, effectively doubling subwoofer power
• Smart System Design: Retains the factory front subwoofer because replacing it on factory power adds cost, not performance

Specifications

SSV Works V6 Speakers

• Speaker Size: 6.5"
• Watts MAX: 160w
• Watts RMS: 80w
• Impedance: 4ohm
• Range: Full
• Warranty: Lifetime

SSV Works V10 Subwoofer

• Subwoofer Size: 10"
• Watts MAX: 1000w
• Watts RMS: 500w
• Impedance: 4ohm
• Sensitivity: 85dB
• Freq Response: 40-1.5kHz
• Warranty: Lifetime

Includes

• (2) 1" Tweeters
• (8) 6.5" Full-range Speakers
• (1) 10" Rear-Seat Subwoofer
• RGB Controller
• Harnesses

Fitment

• 2026 Polaris RZR Pro R 4 Ultimate

Notes

• Doesn't fit 2026 Polaris RZR Pro R Ultimate
• SSV Works V10 Subwoofer is not included and sold separately

SSV Works (About)

Based out of its 20,000-square-foot facility in Oxnard, CA, award-winning SSV Works®, was founded in 2006 and has since become a global leader in designing the market's best off-road, weatherproof audio systems for today's hottest and most popular UTVs. SSV Works is the original purpose-built audio manufacturer, offering every piece needed for a complete, plug-&-play install. With more than 40 years in audio design and manufacturing experience by team members who are also passionate off-road enthusiasts, SSV Works is the top choice among off-road consumers and professionals worldwide. SSV Works currently offers stereo systems for Polaris, Can-Am, Kawasaki, Yamaha, Honda, Arctic Cat, and Jeep vehicles. Take your ride to the next level and install an SSV Works system today!